Fire Engineering Technology

This Linear Pneumatic Heat Detection tube when installed in a small enclosure, filled with fire suppressing agent and pressurised with Nitrogen, will detect heat/fire in the range of 85°C to 135°C . On impingement with this heat/fire, the tube ruptures at the hottest point, forming a dispensing Nozzle, from which the pressurised agent is discharged instantly directly on the source of the heat/fire extinguishing it instantly and flooding the area with the agent, thereby mitigating any spread or reignition of fire.

By utilising a pressure switch attached to the tube via an EOL on one end and interfacing with any existing FACP or Audio-Visual Alarm unit the activation of the unit can be annunciated, or functions like tripping the power supply or switching on/off ventilation etc. can be also achieved.

This automatic Fire detection & suppression is a standalone reliable and simple system that doesn’t require other hard wares or power input to activate and requires no maintenance. The system pressure can be monitored by visual check of the provided pressure gauge.

cqrs: tube based fire suppression for small enclosed spaces (direct system)Fire suppression systems and evacuation alarms are installed throughout the laboratory and activated by heat and smoke. The sprinkler systems are designed to contain fires and prevent small fires from growing into large one. Portable fire extinguishers are required in any area where chemicals are handled or stored.

Electrical Panel are the most valuable asset for any industries.More than 70% fire starts from electrical equipment in any industries.To prevent the loss of electrical panels FIRE ENGINEERING TECHNOLOGY has introduce FET FIREFINDER tube base novec 1230 fire suppression for electrical panels.100% efficient100% performancelow maintanceeasy installationAs per NFPA 2001 standard for clean agent fire extinguishing system.We are one of the Biggest Manufacturers of Fire Suppression System. We Provide Pan India Service for Fire Suppression System. We have our happy clients who are totally satisfied with the quality of our Fire Suppression System. Our Fire Suppression System are of Heavy Build Quality. Our Fire Suppression System is certified by CE and UL .

Clean Agent Fire Suppression System

The causes of fire are many and therefore the classification of fires (A/B/C/D/K) is important. That’s why fire protection specialists must select the appropriate fire-extinguishing system for suppressing a fire, particularly in complex commercial and institutional setups where the use of water is inappropriate, or even dangerous. FET’s latest range of Gas-based Fire Suppression Systems – also known as Clean Agent Fire Suppression Systems – chemical agents to extinguish fires immediately. Each system typically consists of the agent along with agent storage containers, release valves, delivery piping and dispersion nozzles. Backed by FET’s legendary reputation in the area of fire safety equipment, these Fire Suppression Systems guarantee top-of-the-line quality and adherence to Indian fire safety regulations when it matters most.

• The suppression system detects the flames through smoke, heat, and other warning signals. The parts of the suppression systems are often integrated into an alarm system, which gets triggered when the fire is detected. This trigger also initiates the primary steps that help to suppress the fire further.

Fire suppression systems are used to extinguish, control, or in some cases, entirely prevent fires from spreading or occurring. Fire suppression systems have an incredibly large variety of applications, and as such, there are many different types of suppression systems for different applications being used today.

Supply, fixing, testing and commissioning of Clean Agent System (UL/LPCB/VDS) for Electrical Panels (Panel Protection System), consisting of the following components :

10 LB capacity DOT & PESO approved cylinder filled with NOVEC 1230 agent complete with all necessary fitting, support, and accessories, connected with valve. Complete system should be UL/LPCB/VDS approved.

End of Line adaptor 

Pressure gauge for End of Line adaptor 

Pressure Switch 

Flexible Polymer Detection Tube UL Listed

Master Control Unit for connecting  each system with electronic hooters and productivity input to Scada /Fire Alarm system including all necessaries + electrical wiring/sockets etc. to make each entire system functional 

Other Detail:

• Portables: dry chemical, wet chemical, cartridge operated, foam, CO-2, & clean agent
• Wheeled units 
• Restaurant systems 
• Vehicle systems
• Unmanned gas station suppression systems 
• Foam systems
• Industrial systems
• Paint spray booth systems
• Primary total flood suppression systems 
• Secondary specialty suppression systems 
• Detection systems 

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system

Vehicle Fire Suppressiona complete detection & suppression system for vehicles
What is Vehicle Fire Suppression?
Vehicles are not only expensive to purchase, but they can also be essential for your business or have strong sentimental attachment, so the prospect of loosing a vehicle due to engine fire could be catastrophic, not to mention the obvious risk to life.
Whether your vehicle is a commercial vehicle, a restored classic or a modified special, if a fire takes hold it could leave you stranded or worse still, damage the vehicle beyond repair, so protecting it from fire risk with an Automatic Fire Suppression System is a sensible precaution.
Fire Engineering Technology supply and fit a range of Automatic Fire Suppression Systems that are ideal for protecting motor vehicle engine compartments. We install our patented linear detection tubing which is fed around the engine compartment, giving complete protection. This tubing can not only quickly and accurately detect a fire but also extinguish it before it can damage components around the source of the fire.
Key Points:Protects passengers and valuable equipmentEasy / flexible installationQuick & effective suppressionHighly reliable: no electricity or moving partsHighly economical

Fire Engineering Technology Automatic Fire Suppression System does not rely upon complex electronic detectors etc, it is able to operate simply using automatic detection. This removes the need for separate power supplies or battery backups and also makes the entire system fail safe as there are very few moving parts. All of our systems are hassle free to install and can be fitted in a timely efficient manner. Our system uses a patented linear detection tube which is installed around the engine bay and connected to the cylinder valve. The tubing is then filled with nitrogen or compressed air and this pressure is measured precisely to so that the extinguishant does not flow out of the cylinder.
Should a high temperature or fire occur then the pressurised tubing will burst and the extinguishant will flow directly from the burst hole and extinguish the fire. Because the extinguishant flows out the hole created, this effectively becomes a discharge nozzle, meaning the fire is hit at the precise place it has occurred. There is an optional switch that can also be added to the system and again, this is held closed by the pressure in the tube. If the tube bursts or the pressure be lost for any reason, the switch will open and this signal can be used to isolate the engine.

AFDSS - Automatic fire Detection and suppression system
Product DescriptionWe are offering Automatic Fire Detection and Suppression System

Other Details:

• We offer AFDSS for Heavy Earth Moving Machinery (HEMM) and Surface Transportation Machine.
• AFDSS is designed and developed as per Director General of Mines Safety (DGMS) requirements.
• It is fully developed and manufacture in India. It supports the Make In India concept of our Prime Minister.
• FET FIREFINDER: It (AFDSS) is specially designed for HEMM like Dumpers (35T, 50T, 85T and 120T etc), Tippers, Dozers, Shovels, Excavators, Dragline etc.

AFDSS for Excavators,
AFDSS for Backhoe loaders,
AFDSS for Loaders,
AFDSS for Skid steer loaders,
AFDSS for Dumpers,
AFDSS for Bulldozers,
AFDSS for Motor graders,
AFDSS for Road rollers,
AFDSS for Vibratory plates,
AFDSS for Pavers,
AFDSS for Cold planers,AFDSS for Road work equipment,AFDSS for Drilling equipment,AFDSS for Dump trucks,AFDSS for construction equipment,
Automatic fire detection and suppression system in Uttarakhand,
Automatic fire detection and suppression system in SItarganj,
Automatic fire detection and suppression system in Rudraprayag, Automatic fire detection and suppression system in Almora, Automatic fire detection and suppression system in Pithoragarh, Automatic fire detection and suppression system in Rishikesh, Automatic fire detection and suppression system in Sitarganj.