Fire Engineering Technology

HFC 227 Clean Agent Fire Supressions Systems

Automatic Clean Agent Fire Extinguishing Systems control the danger that can occur due to fire and protect all the equipment in the protected area without any damage.

All products are designed and certified according to national and international standards.

Compared to conventional systems, the benefits of HFC 227 include:

• Faster than water extinguishing systems
• Safe for human life, environmental,

extended life suppressant,

• No residue, No waste,
• Prevents damage caused by smoke, ash, and wetness,
• Does not damage protected equipment and objects.
• Not conductive, does not damage the operating function

of electronic devices.

Application Area

Data Center, Telecommunication, Information Technologies

• Shopping Centers, Hotels and Restaurants
• Energy Sector and Auxiliary Industries
• Museums, Archives, Libraries and Schools

Health Industry (Laboratories, drug stores, X-ray rooms?)

• Manufacturing Sector
• Warehouses and Logistic Centers
• Oil, Gas and Hydrocarbon Industry
• Local and Central Government, All Public Buildings, Business Centers
• Wind Power Plants, Hydro Power Plants, Solar Power Plants, Geothermal Plants

Different Detect Solutions

It allows to use various detection methods according to ambient conditions of enclosed volumes. The smoke detector, heat detector, rate of rise heat detector, linear type heat detector, flame detector or spark detector can be used according to the device or the data in the area.

Fast Suppression

It detects fire precisely and quickly from the first phase of the fire. The detection zone, which works with the cross zone principle, allows detection of two zonsets and discharges HFC-227ea gas to the area in less than 10 seconds. Thus, the extinguishing process is started and the extinguishing process is completed if the gas remains in the place for at least 10 minutes.

SERVICES
Design of fire extinguishing agents HFC-227ea complies with the standards NFPA 2001 and ISO 14520,
Pipeline layout by approved hydraulic calculations of UL, definition of nozzles,
Preparation of AutoCAD and isometric drawings,
Preparation of gas cylinders and original equipment in sufficient quantity,
Refilling of cylinders and replacement of spare parts if it is necessary,
Turnkey installation of gas fire extinguishing systems, providing periodic maintenance.

High pressure co2 gas based total flooding system for storage area fitted with automatic valve with solenoid valve, piping, gas release panel and nozzles.

In Gujarat, you can find various electrical fire suppression systems, including gas-based, CO2, and clean agent systems, with options for electrical panels and other high-risk areas. Here's a breakdown of the types and considerations:Types of Fire Suppression Systems:Gas-Based Systems:CO2 (Carbon Dioxide): Effective for electrical panels, these systems use CO2 to displace oxygen and smother fires. Inert Gas Systems (e.g., Nitrogen, Argon): Another common choice, these systems replace oxygen with an inert gas, preventing fire spread. FM-200: A popular clean agent, FM-200 is effective for extinguishing fires without causing damage to sensitive equipment. Novec 1230: Another clean agent option, Novec 1230 is used in various applications, including electrical panels. Clean Agent Systems:Designed for Sensitive Equipment: These systems are ideal for areas with sensitive electronics, as they don't leave residue or damage equipment. Examples: FM-200, Novec 1230. Aerosol Systems:Suitable for various applications: Aerosol systems can be used in areas where water-based systems are not suitable, such as electrical panels. Fire Suppression Tubing Systems:Targeted Suppression: These systems use tubing to deliver extinguishing agents directly to the area of the fire, minimizing damage. Factors to Consider When Choosing a System:Type of Fire: Consider the type of fire hazard (e.g., electrical, flammable liquids) and choose the appropriate suppression agent. Area to be Protected: The size and configuration of the area will influence the system design. Sensitivity of Equipment: If there are sensitive electronic components, choose a clean agent system. Cost: The cost of the system will vary depending on the type, size, and complexity. Maintenance: Consider the maintenance requirements of the chosen system. Suppliers in Gujarat:

Fire Engineering Technology: Offers gas suppression systems for electrical panels.Atharva Enterprise: Provides gas-based fire suppression systems.
Offers aerosol-based fire suppression systems.

Proaction equipment for Industrial Sales & Services: Provides foam fire suppression systems.

Fire Engineering Technology: Offers gas suppression systems.

Fire Engineering Technology: Specializes in fire suppression tubing systems.

Fet suppression system: Manufactures FM 200 fire extinguishing systems. 

Cooking at home is the largest cause of fire and injury in residential properties which is where automatic fire suppression systems can be a life saver. 

Homes are filled with distractions that can quickly allow an unattended hot cooking pan to turn into a large fire bringing devastation to your property.

Conventional fire protection methods such as Fire blankets and Fire extinguishers require the presence of a person to tackle the fire correctly to be effective.

Even if your property is equipped with an automatic sprinkler and smoke alarm, they will only be able to provide a warning and protect the building to aid escape.

When a fire breaks out from an unattended pan the heat and smoke can quickly take over the kitchen. Rapid and fully automatic fire protection is the best solution.

FET® have a solution that will directly protect you and your property, this is achieved with the Automatic Residential kitchen Fire suppression system. All systems are specifically designed to be extremely compact & light, it can be installed in nearby cabinets allowing for a discrete and safe location.

All systems utilise the proven pneumatic heat detection tube that requires no electricity to operate giving you full peace of mind that there is 24/7 protection. This unique pneumatic detection tube will burst and commence the deployment of the specialist Wet Chemical through our stainless discharge nozzle.

Fast and complete knockdown of the fire happens along with a high heat resistance foam blanket to prevent reignition.

All this happens within a short timeframe, minimal clean up means you can quickly get back to your normal day without incurring the huge devastation to your property that an unprotected kitchen would bring.

Residential Kitchen fires are unique and will need to be tested and proved in a slightly different way than other applications. Reacton® use independent testing facilities to put the product through its paces taking detailed measurements and information along the way.

• Systems & components tested by leading laboratories
• Tough testing methods
• Specialist nozzle and cap designs
• Stainless steel components
• Globally approved monitoring devices
• All systems designed, manufactured and tested in ISO 9001: 2015 certified facilities

A professional fire protection company will need to refill and recharge your FM-200 system. FM-200 is a clean agent gas that is discharged through your system to quickly put out a fire without the water damage that could come with a fire sprinkler system—especially in a room of computers, archives, etc.

Licensed fire protection companies can refill your system with the gas used in the system and check for any need for repair or maintenance on your system.

While FM-200 is safe for humans when discharged, has no ozone depleting properties, and is the most effective, cleanest fire suppression system available, you will still need to contact a professional. Because the equipment operates under extremely high pressure, it can be dangerous for someone who is not properly trained. Attempting to adjust or disassemble the pressurized equipment yourself is not only dangerous, but it can also tamper with how the system will operate and help protect from a fire.

Novec 1230 fluid is a clear, colorless and low odor liquid perfectly suited to protect high value assets in areas that may be normally occupied, in locations where clean-up of other agents is problematic, when storage space for a fire suppression agent is restricted, or when an electrically non-conductive agent is required. Each system consists of the following components and their associated accessories:

1. Agent Storage Components – Storage components consist of the cylinder assembly(s), which contains the Novec 1230 fluid, and the cylinder bracket(s), which holds the cylinder assembly securely in place.
2. Agent Fluid Distribution Components – Distribution components consist of the discharge nozzles used to introduce the Novec 1230 fluid into a protected hazard along with the associated piping system used to connect the nozzles to the cylinder assembly.
3. Trim Components – Trim components complete the installation of the suppression system and consist of connection fittings, pressure gauge, low-pressure supervisory switch, electric valve actuator, and manual valve actuator.
4. Slave Arrangement Components – Slave arrangement components consist of the pneumatic valve actuator(s), actuation check valve, vent check, actuation hose, and fittings required for a multiple cylinder (slave) arrangement.
5. Supplemental Components – Supplemental components include the discharge pressure switch and manifold check valve. They supplement the core equipment or complete a specific multicylinder configuration.
6. Control Panel – This device monitors the condition of the electric actuator, detectors, warning devices, cylinder pressure, and any manual release and abort stations. All electric or electronic devices must connect to the control panel in order to function.
7. Detection and Alarm Devices – Detection devices coupled with manual release and abort stations maximize system efficiency while audible and visual alarm devices alert staff of alarm conditions.