Fire Engineering Technology

There are a few different types of agents that are used in a suppression system to suppress the fire. In server rooms and environments where you have personnel working in the area, you will usually find clean agent or inert gas suppression systems. In environments where there are few personnel or none at all, you will typically find CO2 fire suppression systems. The areas that you’ll find CO2 fire suppression systems include engine rooms, generator rooms, power stations, flammable liquid storage rooms, and around large industrial machines.

While CO2 fire suppression systems are highly effective at suppressing fires, the CO2 agent also poses a health risk when compared to the other agents. For this reason, you’ll find CO2 fire suppression systems most often in non-occupied environments.

How does a CO2 Fire Suppression System Put Out a Fire?

A fire needs oxygen, fuel, and heat to continue to burn. By eliminating one of these three elements, a fire can be suppressed or extinguished. While some suppression agents reduce the heat of the fire, a CO2 fire suppression system eliminates the oxygen to suppress the fire. When the suppression system detects smoke or fire, it then releases the CO2 agent into the space it is protecting. The CO2 level in the space quickly increases as the oxygen level quickly drops causing the fire to be suppressed or extinguished.

 

CO2 is a colorless, odorless, and electrically non-conductive gas that leaves no residue behind. This means any sensitive equipment that is in the protected space is not damaged by the CO2, which reduces downtime and costs. Once the CO2 has dispersed to safe levels from the protected space, personnel can access any damage from the fire or smoke and quickly get back to work with no cleanup needed.

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system

Installing An Automatic Fire Suppression System In Mining Equipments

 

One of the reasons for fire related mishaps in mines could be due to the engine short in mining vehicles like trucks or dumpers .Fire accidents are one of the most hazardous accidents. It is capable of not only harming the explosion site but also can destroy the nearby assets and lives. Such mishaps can be prevented with regular servicing of mining vehicles along with the integration of fire suppressing aids. 

One of the effective ways to prevent any potential fire accidents can be by installing fire extinguishing units. However, the conventional portable fire extinguishers can be absolutely inconvenient and non-effective in the overall fire suppressing operation, to counter this problem My Port Services India presents the smart and most efficacious Automatic Fire Suppression System. 

 

This article will help you understand the top advantages of having an Automatic Fire Suppression System. 

 

 

Pre detection- Be absolutely sure about any probable fire hazards 

Did you ever wish that you were notified about any upcoming accident so that you could take the required measures to circumvent it? Well if you ever felt like that, then these Automatic Fire Suppression Systems are a perfect partner for you. Automatic Fire Suppression System can sense any overheat or fire conditions before the situation becomes too dangerous and gets out of hand. 

 

 

Real time Alerts

Now that you know that our Automatic Fire Suppression System is well aware about the potential accident it will ensure not withhold the information with itself and immediately start to indicate the condition with a buzzer sounding continuously to alert the operator to take the required steps to safeguard himself as well as the material. 

 

 

Immediate Engine Shutting off

As soon as the signs of fire or heat is detected, the engine is shut off automatically to cut down the fire activity to spread further thereby avoiding a severe mishap. 

 

 

Automatic Activation of Extinguishing System

This Automatic Fire Suppression System does not stop just by warning the driver and shutting the engine off, it also makes sure if in any case outspread of fire occurs the system will activate its extinguishing operation by the activation of Solenoid Valve on pressurized Pilot Cylinders leading to release of pressurized Nitrogen into DCP Cylinders, Manual Override facility. Propulsion of DCP through the hose network from the nozzles to extinguish the fire. The Engine Shutoff relay is also energized in the process, thereby shutting off the engine to prevent further spread of fire. 

 

 

By now you must have understood that this Automatic Fire Suppression System offers you a bunch of advantages that are undoubtedly crucial for your mining activities.

Firessense Tube for Detection.Fire Extinguisher Cylinder with Automatic Valve Assembly.Clean Agent Fire Fighting Gas.Pressure Switch.Audio Visual Alarm.Control Panel.The following are the features of the Firessense System.Simple self-activating system without human intervention.Linear Heat Detection - senses fire anywhere along the entire length of the fire detection Tube.Extinguishes fire at an early stage.System activates automatically.Safe against malfunction.More reliable as system does not rely on complex electronics or moving parts.System does not need external power supply for detection and extinguishing of fire.Easy to maintain because of simple construction.

Dcp powder based indirect valve fitted tube based automatic fire detection and suppression system as per dgms norm for safety of mining trucks fully reliable system more than 50 installation over india.

Other Detail:

• Easy installation
• Easy to maintain a proven technology from last 10 years.

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system

Kitchen Fire Suppression system is capable of automatic detection and actuation and/or remote manual actuation. This means that kitchen staff – who often will be alert to the danger before the automatic function kicks in – will be able to activate the system quickly, meaning the fire is dealt with even faster!

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system