Fire Engineering Technology

Fire extinguishers are essential safety devices that can be the first line of defense in controlling small fires. Understanding the various aspects of fire extinguishers, including their types, ratings, sizes, and classes, is crucial for effective fire safety. In this comprehensive guide, we will explore the intricacies of fire extinguishers to empower individuals with the knowledge needed to make informed decisions in selecting and using these critical safety tools.

VEHICLE fire suppression also called AFDSS are a mandetory part of any mining industries for their construction vehicles.

fire engineering technology is one of the best economic and quality product manufacturer of fire suppression system

Clean agent gas and high pressure CO2 i.e. carbon di oxide gas based automatic gas fire suppression system. Pin Point and total flooding system supplier.

The red Firetrace Detection Tubing (FDT) is at the heart of the system. By routing the tubing throughout a special hazard, the system can detect a fire at its source. Under normal circumstances, the FDT detects a fire 10 times faster than traditional methods. Firetrace direct release and indirect release systems do not require electricity to operate and accurately detect fires even in the presence of dust, particulates, and other environmental challenges.

Other Detail:

• Industrial Clean Agent Fire Suppression Systems from Kidde Note: Numbers below refer to image (right). Fire in protected area is sensed by detectors and sent to control unit.
• Control unit shuts down ventilation systems, sounding alarms and starting discharge of FM-200 agent into protected area.
• FM-200 is propelled into protected area through piping & nozzles.
• FM-200 quickly suppresses fire. No fire, no mess, back in business.

For All Types of Industrial Fire ProtectionProcesses Involving Flammable Liquids

Dip Tanks:

• Industrial/ Automotive Paint Booths
• Coating Operations
• Quench Tanks

Specialty Hazards:

• Modular HazMat Storage Facilities
  • Exhaust Ducts
  • Environmental Storage Facilities
  • Processes Involving

Electrical and Mechanical Rooms

• Boiler Rooms
  • Switchgear Rooms
  • Generator Rooms
  • Furnace Rooms

Flammable Liquid Storage Areas:

• Flammable Liquid Storage
  • Paint Mixing Areas
  • Spill Containment Dikes
  • Bulk Storage

Fire protection system Surguja,
Fire protection system Balrampur-Ramanujganj,Fire protection system Jashpur,Fire protection system Koriya,Fire protection system Manendragarh,Fire protection system Surajpur,Fire protection system Surguja,
Fire protection system Bilaspur,Fire protection system Gaurella-Pendra-Marwahi,Fire protection system Janjgir-Champa,Fire protection system Korba,Fire protection system Mungeli,Fire protection system Raigarh,Fire protection system Sakti,Fire protection system Sarangarh-Bilaigarh,
Fire protection system Baloda Bazar,Fire protection system Dhamtari,Fire protection system Gariaband,Fire protection system Mahasamund,Fire protection system Raipur,
Fire protection system Durg,Fire protection system Balod,Fire protection system Bemetara,Fire protection system Kabirdham (Kawardha),Fire protection system Khairagarh-Chhuikhadan-Gandai,Fire protection system Mohla-Manpur-Ambagarh Chowki,Fire protection system Rajnandgaon.

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system

Description

• The FET CLEAN AGENT EXTINGUISHING SYSTEM is our automatic fixed fire suppression system using clean agent gases to extinguisher all types of fires.
• The system is designed and restricted as per NFPA standards. It is capable of auto detection and actuation and manual actuation.
• The main application of the system is for data centres, server rooms or UPS rooms where important data is stored or expensive material is placed which you cannot afford to lose in case of fire.

Advantages

• Total solution of fire
• Safe for human
• Environment friendly
• Residue free
• 24x7 protection with alarm
• Multiple actuation

Applications

• Data Centre
• Server Rooms
• Medical Facilities
• Industrial Control Rooms
• Marine Vessels

Gaseous fire suppression, also called clean agent fire suppression, is the use of inert gases and chemical agents to extinguish a fire. These agents are governed by the National Fire Protection Association (NFPA) Standard for Clean Agent Fire Extinguishing Systems – NFPA 2001 in the US, with different standards and regulations elsewhere.

Gas-based Fire Suppression Systems – also known as Clean Agent Fire Suppression Systems – chemical agents to extinguish fires immediately. Each system typically consists of the agent along with agent storage containers, release valves, delivery piping and dispersion nozzles.

2 KG FM-200/ Novec-1230/ FK-5112/ Clean agent filled cylinder fitted with Direct Low Pressure (DLP) Valve, Push in Connector, Low pressure switch, End of line adopter & Master Control Unit suitable for 2 Mtr Panels.
Fire Detection Tube or Firetrace Tube, Firedetec Tube 20 Mtr.

Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System,
Modular Fire Suppression System.

Kitchen Fire Suppression System

Cooking at home is the largest cause of fire and injury in residential properties which is where automatic fire suppression systems can be a life saver. 

Homes are filled with distractions that can quickly allow an unattended hot cooking pan to turn into a large fire bringing devastation to your property.

Conventional fire protection methods such as Fire blankets and Fire extinguishers require the presence of a person to tackle the fire correctly to be effective.

Even if your property is equipped with an automatic sprinkler and smoke alarm, they will only be able to provide a warning and protect the building to aid escape.

When a fire breaks out from an unattended pan the heat and smoke can quickly take over the kitchen. Rapid and fully automatic fire protection is the best solution.

FIRE ENGINEERING TECHNOLOGY have a solution that will directly protect you and your property, this is achieved with the Automatic Residential kitchen Fire suppression system. All systems are specifically designed to be extremely compact & light, it can be installed in nearby cabinets allowing for a discrete and safe location.

All systems utilise the proven pneumatic heat detection tube that requires no electricity to operate giving you full peace of mind that there is 24/7 protection. This unique pneumatic detection tube will burst and commence the deployment of the specialist Wet Chemical through our stainless discharge nozzle.

Fast and complete knockdown of the fire happens along with a high heat resistance foam blanket to prevent reignition.

All this happens within a short timeframe, minimal clean up means you can quickly get back to your normal day without incurring the huge devastation to your property that an unprotected kitchen would bring.

Our High Performance Systems

Residential Kitchen fires are unique and will need to be tested and proved in a slightly different way than other applications. Reacton® use independent testing facilities to put the product through its paces taking detailed measurements and information along the way.

Our Kitchen fire suppression system features include:

• Systems & components tested by leading laboratories
• Tough testing methods
• Specialist nozzle and cap designs
• Stainless steel components
• Globally approved monitoring devices
• All systems designed, manufactured and tested in ISO 9001: 2015 certified facilities
• Why Class F Wet Chemical

  Class F Wet Chemicals are the leading choice for fire suppression when suppression of Fats & Oils is required. Reacton’s Class F Wet Chemicals are stored as a liquid, super pressurised with dry nitrogen and applied via a specialist nozzle.

  Specially designed to tackle Class F hazards (Cooking Oils or Fats) the Class F Wet Chemical has special materials that react with hot burning oil to create a thick soapy heat resistant crust on top of the cooking oil surface, preventing the flammable vapours reacting with oxygen. It has the same quick flame knockdown as Dry Powder or Foam, but Class F Wet Chemical has the advantage of the high heat resistant fire blanket.

  The fire extinguishing agent is extremely effective and has an 8A-34B-25F rating with only 2 litres of 50% concentration. Therefore, not only does this extinguishing agent offer a Class F rating it also provides Class A & Class B fire protection. Meeting EN3 European standard as a Class A-B-F water additive.

Novec 1230 Advantages

Firstly, we’ll delve into the Novec 1230 advantages, as there is a reason behind the increase in installation among properties around the globe with this suppression fluid. Here are some of the main standout benefits of why you would want to invest in this fire extinguishing agent:

 

• Quick Suppression: If your building is primed for Novec 1230 fluid, this fluid can vaporise and evenly distribute its effectiveness within 10 seconds of being triggered by the detector or fire alarm
• No Damage to Your Equipment: With it being a clean agent, non-conductive and non-corrosive, it is safe for all sensitive electronics and valuable equipment within your property
• Environmentally friendly: As we briefly mentioned, Novec 1230 has a low global warming potential, ozone depletion potential and atmospheric lifetime, causing minimal harm to the environment compared to other agents due to containing no carbon dioxide or any other harmful gases
• Safe for Everyone in the Building During Evacuation: Installing Novec 1230 is safe for human exposure at its designed oxygen concentration, providing an additional level of protection for building occupants
• Residue-Free After the Event of a Fire: Due to the nature of this clean fire suppression fluid, it leaves no residue or water behind, eliminating the need for extensive cleanup and preventing secondary damage (meaning your business can be back up and running quickly

Stand alone fire suppression system is perhaps a bit of a misnomer, since this term refers to�individual devices that contain fire suppression mechanisms that are not linked to a bigger system