Fire Engineering Technology

• Long service life
• Simple design
• Smooth performance

• The FET system helps you to reduce the footprint, installation and service cost by offering you a choice from 30L to 180L cylinders in 25 bar or 50 bar configurations. 
• Less cylinders are needed for your installation due to the high filling ratio that can be up to 1,2kg/L 
• The 50 bar pressure option allows the cylinders to be placed further away from the protection zone. 
• Extremely fast discharge of agent within 10 seconds. The fire is out before it has a chance to spread. Damages and downtime are at an absolute minimum. 
• The FET system is designed and manufactured by FIRE ENGINEERING TECHNOLOGY POWERED BY TYCO/ ANSUL SYSTEMS. A world leader in reliable control systems for pressurized gas applications. 

KEY BENEFITS :

• Choice from 30L to 180L cylinders 
• 25 or 50 bar working pressure 
• Filling ratio up to 1,2 kg/I 
• Space- efficient as less space needed for cylinder storage 
• Reduced cost for piping and maintenance 
• Fast discharge and effective suppression 
• No residue- nothing to dean 
• Safe for humans within the NOAEL limitation 
• Non-conductive electrically 
• Proven high quality valve technology

• IT systems and computer rooms
• Archive rooms, document safes
• Emergency call centres, flight navigation and control towers, mobile phone transmitter stations, internet service provider centres, television, radio and control rooms, microwave substations.
• Art galleries, libraries, film projector rooms, museums
• Medical sector: imaging systems, operating rooms, mobile stations
• Industrial facilities such as laboratories, control rooms, offshore drilling platforms, robotic equipment
• Emergency power generators, battery compartments, low-voltage compartments, cable compartments, etc.
• Flight simulators, ships, military vehicles

Fire Detec is a simple self activating system which can be installed inside closed cabins and machinery housing to detect and extinguish fire automatically at source during the initial stages of the fire. It is ideal for any application where the fire risk is within an enclosure or confined space. Fire Detec puts out fire at the source by means of a flexible fire detection and delivery tube. The application of this system includes generator rooms, machinery, electrical panels Computer Installations, etc. The system can be offered with a variety of quenching agents like Water, CO2, Foam, dry chemical powder, etc.

The tube is manufactured from specially produced polymer material to achieve the desired detection and delivery characteristics. The unique characteristics of the tube combines leak resistance, flexibility, durability and precise temperature sensitivity allowing the tube to react quickly when the heat from a fire is present. Fire Detec tube detects a fire not only at a single point but also at any place along its length (linear detection).

The extinguishing system may be used as stand alone device or can be fully integrated with an alarm system . Features like shutting of power/ fuel supply to the protected equipment can also be incorporated. These features offer early warning and significantly reduce the risk of re-ignition and avoids unnecessary damage.

Electrical Panels

 a) Server Racks

 b) Generators

 c) Fume Cupboards

 f) Kitchen Hoods

 e) CNC Machines

 g) Storage tanks

A simple self-activating system designed to detect & extinguish fire automatically at source. The fire Protection system can be offered with a variety of quenching agents like Water, CO2, Foam, dry chemical powder, etc.

The Sensor tube is a special Polymer coated tube which ruptures on encountering a fire. On rupture, the pressure in the tube falls, activating the flow of extinguishing agent through the point of rupture or through a separate nozzle.

 Fast, effective fire detection & suppression for individual specific to type cabinets. Installs directly inside cabinets & closer to where fire can start.

 Use with CO2 / Water / Class ‘F’ extinguishing agents in 5 litre / 10 litre capacity. Adapted to conditions of high vibration and high air circulation in respect of moving vehicles.

Electrical Cabinets & other enclosed areas with high risk electrical circuitry.
CNC Machines& other high-risk Mechanical equipment.
Vehicle Engine system. Special Liquid agent to suppress oil-based fires in high air flow conditions.Sustained discharge to prevent fire re-ignition. Flexible Sensor housing to suit any engine configuration.
Laboratory Fume cabinets & other zones at risk from chemical Combustion.

while sprinkler systems are the most common type of fire suppression system, some applications require special hazard fire suppression systems that do not use water. These systems are unique in that they can deal with hazards where water could actually do more harm than good. Within fire science, there are several classes of fires: class a, b, c, d, and k. The fuel of the fire will dictate what can put it out. Class a fires, for example, involve wood, and a sprinkler system would work well. A class c fire, on the other hand, is an electrical fire and that may get worse by trying to suppress it with water. In summary, the specific environment will determine which system will work best.

types of fire suppression systems engineered vs. Pre-engineered fire suppression systems also need discussion. Engineered fire suppression systems will protect an entire room. Firetrace, for example, uses clean agents that are safe with electronics and can be inhaled without doing any harm to a person.
pre-engineered systems are used to protect small compartments or micro-environments. Engine compartments and electrical panels are good examples of where these types of systems would provide protection. They are also useful for suppressing fires in cnc and edm machines.
firetrace pre-engineered fire suppression systems are available in two configurations: indirect release and direct release. Watch the video below to learn about the two different firetrace pre-engineered fire suppression systems.
fire suppression agents: within pre-engineered fire suppression systems, there is a slew of agents that can be used. Class k systems typically have foam fire suppressants or other wet chemical agent options to help reduce the spread of the fire within the space. Engines, by contrast, are typically protected using abc dry chemical powder, which can effectively suppress class a, b, and c fires.
detection options: a pre-engineered system usually comes in two forms or categories.  the first is an active detection system, while the second is a non-electric detection system.  active detection requires an electrical power source, constantly seeking out heat or smoke.  a non-electric detection system relies on zero electricity
non-electric detection systems, including the firetrace pre-engineered system, utilize pneumatic detection tubing that can be installed inside and throughout hazards. Since heat rises, it works to trigger the pneumatic detection tube. If the heat or fire comes in contact with the tube, the tubing will burst open at the point of contact. It causes a pressure change in the entire system and will tell the system to discharge its fire suppression agents. Agents you can use with these systems include carbon dioxide, dry chemicals, clean agents and foam suppressants.  

fire suppression system for manufacturing & machines.
fire suppression system for wind turbines.
fire suppression system for container handling equipments.
fire suppression system for electrical panels.
fire suppression system for mining vehicles.
fire suppression system for earth movers.
fire suppression system for cnc machines.
fire suppression system for server racks.
fire suppression system for lt panels.
fire suppression system for ht panels.
fire suppression system for capacitor panels.
fire suppression system for wind turbines.