Fire Engineering Technology

Type	Fire Alarm System
Fire Suppression Type	Fire Extinguisher
Capacity	ANY
Automation Grade	Automatic
Usage/Application	GAS FLOODING SYSTEM
Extinguishing Agent	CLEAN AGENT AND CO2
Brand	FIRE ENGINEERING TECHNOLOGY
Color	RED
Cylinder Height	AS PER CAPACITY
Design	AS PER NFPA

Type	Wired
Usage/Application	Truck
Range	2 CUBIC MTR
Brand	FET
Screen Size	2.5 inch
Material	DCP POWDER
Model Name/Number	AFDSS
Warranty	12 MONTHS
Color	RED
Battery	24V

Vehicle Suppression Systems

February 24, 2022

Vehicle suppression systems keep large vehicles safe in case of fire.

Large construction vehicles and buses are a significant investment for private firms and public transit authorities. Replacing a large construction vehicle consumed by fire is a serious financial setback. Transit authorities need to provide reliable, safe transportation. To protect these assets and the people who use them, install a vehicle suppression system.

 

What is a Vehicle Suppression System?

A vehicle suppression system is a fire extinguishing system installed in a vehicle engine compartment or anywhere else that presents a risk of fire. These systems are designed to discharge a dry or wet chemical extinguishing agent. They can use spot-type heat detectors or linear detection tubing. The type that is installed will depend on the vehicle and its intended use.

Different Types of Vehicle Suppression Systems

Vehicle suppression systems can be dry, wet, or a dual agent system that utilizes both wet and dry chemical agents. Dry systems deprive the fire of oxygen, while wet systems cool the fire. A dual system combines these elements for a more thorough suppression of the fire. A Fireline professional can help determine which system is best for you based on the vehicle type and intended use.

Type of Fire Detectors	Heat detector
Material	Mild Steel (MS)
Operating Voltage	230V AC
Operating Current	5 AMP
Operating Temperature	100
Brand	FIRE ENGINEERING TECHNOLOGY
Relay Outputs	Alarm Relay, Supervisory Relay, Trouble Relay
Certification	UL/ FM/ LPCB/ CE
Dimensions	CUSTOMIZE
Weight	1.3 KG
Control Keys	Evacuate, Mute Buzzer, System Reset

Introduction of Fire Detection and Alarm System

Fire detectors are designed to detect one or more of the three characteristics of fire-smoke, heat and flame. Besides it every fire detection system must include manual call points (break glass), so that in the event of fire can be of immediate help.
During a fire importance of activation of the occupants through alarm or bell is of at most vital and this can performed through alarm system.

Microprocessor based addressable analogue type fire alarm and detection system to be used for various building/areas to detect and provide alarm signal in the main fire alarm panel to be located in the central control room. Fire alarm will be repeated in a repeater alarm panel in the fire station.
Main fire alarm panel annunciation shall be located in the control building. A repeater panel shall be provided in the fire station. Total no of annunciation shall be based on the specific plant requirement.
One (1) siren of 10 Km range is envisaged to provide warning in the event of fire.
In addition to it, PLC panel shall be provided at fire pump house and foam pump house.

Fire Fighting System Type	Fire Suppression Systems
Packaging Type	Set
Capacity	1-9 Kg
Usage/Application	Electrical Fire, Kitchen Fire, Vehicle Fire etc
System type	Pre-Engineered System
Brand	FIREFINDER
Material	Mild Steel
Environment Temp	100-120 DEGREE
Fire Suppression Type	Fire Extinguisher, Cylinder
Certification	UL/ LPCB/ CE

The principle of all Tube Fire Suppression Systems is a simple self-activating system that offers the widest versatility, which results in an excellent cost / performance balance. Trace Tube Systems can be used in a range of applications, with the principals remaining the same; Stop The Fire Where It Starts.

Electrical Panels & Switch-gear Fire Suppression | Tumble Dryers | Plant & Machinery fire suppression | Fume Cabinet fire suppression | CNC & EDM Machinery | Wind Turbines Agricultural Machinery | Cars/Vans/Trucks – including Motor Sport | Rail & Dockside

FireFinder Quickly & Accurately: These systems use linear detection tubing which is installed throughout the asset it’s covering & can not only quickly and accurately detect a fire but also suppress it before it can damage adjacent components.

Simple Solution To A Complex Fire Problem: These systems do not need complicated electronic detectors or panels and operate simply pneumatically.This alleviates the need for separate power supplies or battery backups and also makes the entire system fail safe with minimal moving parts. We offer a choice of extinguishant agents such as Novec, CO2, Powder, FM200, some of which can be used safe in the knowledge that they will not damage the electrical components or leave a residue.

Fire Fighting System Type	Fire Suppression Systems
Packaging Type	Set
Capacity	Any as per requirement
Usage/Application	Electrical Panels & server area
System type	Clean Agent Suppression System
Brand	AR Suppression
Material	As required
Environment Temp	21
Fire Suppression Type	Pipeline, Fire Extinguisher, Cylinder
Certification	UL

FK-5-1-12 Gas supression or FK-5-1-12 fire pritection system is a kind of gas flood system. 

• FK 1230 (FK-5-1-12) fire suppressant can be safely used where people are present. FK 1230 (FK-5-1-12) systems reach extinguishing levels in 10 seconds or less, stopping ordinary combustible, electrical, and flammable liquid fires before they cause significant damage. That’s the fastest fire protection available, period.
• • The  FK-5-1-12 system is armed and ready to eliminate any fire hazard at a moment’s notice. Its 500 psi operating pressure provides ultimate design flexibility and ensures that the necessary amount of agent reaches every corner of the protected space in under ten seconds, extinguishing a fire in its very earliest stages.

  • FK 5-1-12 is a chemical agent designed and manufactured for Fire Suppression applications. FK 5-1-12 has zero Ozone Depletion Potential making it a replacement for other chemical agents used in Fire suppression like HFC227ea. FK 5-1-12 can be used in manned area and are not harmful to human being.

    The importance of erection, testing and commissioning are overlooked in many projects while installing and fixing Clean Agent Gas Fire Suppression System. It is a very common practice to fabricate the Clean Agent Gas Fire Suppression System including the manifold at site.
    It is very difficult to ensure the proper integration of entire cylinder bank assembly which involves very high pressure and critical instrumentation such as solenoid connection, pneumatic actuation to ensure proper functioning of the entire system.

    
    bala-wa -5112 Clean Agent Fire Suppression-High Pressure fixed installation clean agent gas cylinder banks are fully pre-assembled,integrated & tested for its proper operation at the factory itself. Customers and consultants may strongly recommend to use pre-assembled & tested bala-wa-5112 cylinder bank assembly.

Alarm Volume	100 DB
Relay Outputs	Supervisory Relay
Alarm Indication Type	Audeo Visual
Control Keys	Mute Buzzer, System Reset, Evacuate
Protection Category	Detection and suppression
Protection Class	B & C
Standard	NFPA 2001

• Electronic fire detection is attached to an alarm system that will alert you when the fire has been detected and initiate steps to further suppress the fire. In contrast, non-electronic systems will activate and deploy the fire suppression agent without notification.

• A fire suppression system combines devices and equipment to detect and combat fires, often through water, gas, or other chemicals. These systems are engineered to activate automatically upon detecting a fire, deploying suppressants to halt the spread of flames and mitigate damage.

  Unlike a simple fire extinguisher that requires manual operation, fire suppression systems are typically integrated with smoke or heat detectors and alarm systems. When a fire is detected, the system dispenses its suppressant material, such as water, foam, or gas, to quench it. In high-risk commercial environments like server rooms or kitchens, these systems prioritize human safety and the protection of valuable assets.

Packaging Type	Set
System type	Pre-Engineered System
Usage/Application	Industrial
Brand	AR SUPPRESSION
Material	Metal Alloy
Environment Temp	21
Fire Suppression Type	Fire Extinguisher, Cylinder, Pipeline
Certification	UL & CE
Operating Temperature Limit	100-120
Working Pressure	15 BAR

Automatic fire suppression systems control and extinguish fires without human intervention. Examples of automatic systems include fire sprinkler system, gaseous fire suppression, and condensed aerosol fire suppression.