electrical fire suppression systemsuse the patented detection tubing which is installed throughout the enclosure and connected to the cylinder valve. The tubing is then charged with nitrogen and this pressure is utilised to hold back the extinguishant in the cylinder.
Should a high temperature or fire occur then the pressurised tubing will burst and the extinguishant will be deployed directly from the burst hole onto the fire.
This effectively means the fire has formed the discharge nozzle so it is always exactly in the right location.
A switch is also added to the system and is held closed by the pressure. Should the tubing burst or the pressure be lost for any reason then the switch will open and this signal can be used to isolate the power and raise an alarm.
|Fire Extinguisher Type||Novec1230 gas based|
|Brand||Fire Finder,SEVO,Firedetec and Firetrace|
|Features||FIre Suppression Fluid|
|Type||Clean Agent Fire Suppression System|
|Fire Extinguisher Type||Clean Agent Fire Suppression System|
|Material||D.O.T. & CCOE|
|Fire Suppression Type||Clean Agent Fire Suppression System, Pipeline, Cylinder|
|Body Material||SS & MS|
he SEVO 1230 FORCE500 Clean Agent Fire Suppression System is a revolutionary new technology for clean agent systems that utilizes 3M Novec 1230 Fire Protection Fluid and its unique ability to be pressurized to 500 psi (34.5 bar). It allows for longer pipe runs and smaller pipe diameters in addition to its cost saving benefits of using less clean agent in smaller and/or fewer cylinders per project. Along with these new engineering capabilities, it includes standard monitoring components such as an integrated pressure switch, pressure gauge, and gauge guard. The low vapor pressure of Novec 1230 FLuid allows for the use of low pressure welded cylinders and Schedule 40 piping. With these revolutionary features, the FORCE500 is a standout to conventional 360 psi (25 bar) systems.
|Fire Extinguisher Type||Gas flooding system|
|Brand||Kidde,Ansul,Saffire,Cryptzo,Sevo,TYco and reputed|
|Features||Fire Fighting Clean agent|
|Operating Temperature Range||100-120|
|Test Pressure||25 bar|
|Time Of Extinguishing||10-15 sec|
|I Deal In||New Only|
|Stored Gas Type||Clean agent|