- Home
- ยป
- Products & Services
- »
- Fire Protection System
Fire Protection System
Fire suppression systems are used to extinguish, control, or in some cases, entirely prevent fires from spreading or occurring. Fire suppression systems have an incredibly large variety of applications, and as such, there are many different types of suppression systems for different applications being used today. Of these, there are some that are still in use but are no longer legal to manufacture and produce.
Clean agent based fire suppression system,
FM-200 gas fire suppression system,
HFC227ea Gas fire suppression system,
Novec-1230 gas fire suppression system,
FK-5-1-12 Gas fire suppression system,
CO2 Gas fire suppression system,
Kitchen Fire suppression system,
Vehicle Fire suppression system.
WET CHEMICAL KITCHEN FIRE SUPPRESSION SYSTEM (LHS)
Product Brochure
Fire Fighting System Type | Fire Suppression Systems |
Usage/Application | Commercial |
Capacity | 10L |
Packaging Type | Set |
System type | Kitchen Fire Suppression System |
Brand | AUTOFIREX |
Material | Carbon Steel |
Environment Temp | 135 |
Fire Suppression Type | Pipeline, Cylinder, Fire Extinguisher |
Certification | UL/CE |
Operating Temperature Limit | 140+ |
Working Pressure | 15 BAR |
Temperature | 150 |
Cylinder Size | 10L |
Working Temp | 150 |
Cylinder Volume | 10L |
Discharge Time | 7-10 SEC |
Purity | 100% |
Filling Density | 80% |
Power | 230V AC |
Automation Grade | Automatic |
Spray Duration | 10 SEC |
Model Name/Number | AFX-P |
Finishing | CROME |
Suppression System | KITCHEN FIRE |
Portable | Portable |
Control Head | PNEUMATIC |
Chemical Agent | WET CHEMICAL |
Installation Services Required | Yes |
AutoFireX® ILP- Indirect Low-Pressure Clean Agent Systems are primarily Pre-Engineered Automatic Fire detection and suppression System utilising various Low-pressure agents like, ABC Dry Chemical Powder, Foam, Clean agents (HFC227ea, FK 5-1-12, FE36). These Units are designed, manufactured, and tested in ISO 9001:2015 certified facilities
The AutoFireX Linear Pneumatic Fire Detection Tubing (FDT) is installed and connected to ILP Valve via dual seal threaded union attached to the isolation ball valve and routed over/near the protected hazard area/enclosure. Being heat sensitive, the primary function of Linear Pneumatic Fire Detection Tube (under pressure) is to detect heat/fire and activate the valve for discharge of the agent by rupturing at the hottest point along its installed length on flame impingement. On rupture due to loss of pressure in the tube connected to the valve, the pressure from the top head assembly of the ILP valve is released (this can also be achieved by manual activation via operating manual release) thereby initiating internal piston to open position, allowing the pressurised agent to travel through any or combination of three outlet ports via delivery hose/pipes and discharge out from the fixed nozzles, within the protected area, flooding the entire area with the agent and suppressing the fire instantly.
CNC Machines Fire Suppression System
Product Brochure
Brand | Fire Engineering Technology |
Capacity | 5 kg |
Packaging Type | Box |
Usage/Application | Commercial |
Material | Carbon Steel |
Working Pressure | 25 Bar |
Temperature | 120 Degree C |
Filling Density | 0.68 kg/m3 |
Finishing | Polished |
The three-level protection that a data center requires:
- Building level fire protection:
The first level of fire protection is to protect the employees and building from fire. Water sprinklers and handheld extinguishers are key components of fire protection and suppression systems. Installing a fire extinguisher from a well-known fire extinguisher distributor on every floor and training the employees about how to use the fire extinguisher and what escape route to follow when a fire breaks out helps to save many lives. Some passive fire protection that includes firewalls and fire-rated floor assemblies can restrict the fire to spread and hence can easily be controlled and extinguished.
- Room level fire protection:
Now it is time to protect the data center room from the fire. It can only be possible through a suitable fire alarm detection system. There must be smoke detectors and a Palladium zone 32 fire alarm system installed so that they can warn when the fire is in its initial stage and appropriate steps can be adopted to save the data center. Installing water sprinklers also helps in extinguishing small fires but the water can cause as much damage to servers and hard drives as fire can so it is advisable to always go for gas sprinklers.
This gaseous system can be an inert gas or clean agent gas. An inert gas is the mixture of nitrogen and argon gases as they help in decreasing oxygen levels in the room thus put the fire to an end. But special design nozzles are required to muffle the powerful sound given off when the inert system activates.
Clean agent gases are electrically non-corrosive, non-conductive, and leave no residue upon evaporation. This makes them the ideal fire suppression agents in data centers. Just like the water system this system works. These systems are known as total flood or engineered systems.
- Rack Level Fire Protection
The last level is to protect specific equipment. Some equipment is valued at more than 50% of the cost of the room so it creates the special need to protect the equipment at the rack level to save money and investment. So to protect them from any damage, special fast sensors are being installed near to the equipment so that if any unusual situation rises then it detects within seconds and suppresses it before the total flood system activates. So this helps to prevent the damage caused by fire and water.
Heat Sensing Tube Suppression System
Minimum Order Quantity: 2 Set
Product Brochure
Type | DLP SUPPRESSION SYSTEM |
Brand | AR Suppression |
Capacity | 2 kg |
Packaging Type | STANDARD |
Usage/Application | Electrical Panel |
Fire Extinguisher Type | AUTOMATIC FIRE DETECTION AND SUPPRESSION SYSTEM |
Material | Mild Steel |
Environment Temp | 21 Degree C |
Operating Temperature Limit | 100 Degree C |
Working Pressure | 15 Bar |
Density | 0.67 kg/ Cube m |
Discharge Time | 10 Sec |
Effective Range | 2 mtr |
Purity | 99.9 % |
Storage Pressure | 35 Bar |
Automation Grade | Automatic |
Model Name/Number | FETFF05 |
The scope covers Supply, Installation, Testing and Commissioning of Automatic Clean Agent Flooding System complete for electrical panels with Fire Finder tube, cylinder, valves, integration with Main Fire Alarm Control Panel for status monitoring etc. The work to be executed by authorized & certified Fire Finder installer shall cover: i. Providing Direct Panel Gas Flooding System with linear Fire Finder tube inside the panels. ii. Arrangement of Clean Gas Agent for flooding inside the panels. iii. Audio-visual annunciation devices for indicating incidence of fire. iv. Any other item required to the successful commissioning of the system.
FIRE SUPPRESSION SYSTEM SUPPLIER INDIA.
FIRE SUPPRESSION SYSTEM MANUFACTURER INDIA.
FIRE SUPPRESSION SYSTEM TRADER INDIA.
We are one of the Biggest Manufacturers of Fire Suppression System. We Provide Pan India Service for Fire Suppression System. We have our happy clients who are totally satisfied with the quality of our Fire Suppression System. Our Fire Suppression System are of Heavy Build Quality. Our Fire Suppression System is certified by CE and UL .
Additional Information:
- Item Code: 84241000
- Production Capacity: 250/ MONTH
- Delivery Time: 3-5 WEEKS
- Packaging Details: ELECTRICAL PANEL FIRE EXTINGUISHER NOVEC 1230 GAS BASED (2 kG). FIRE DETECTION TUBE (10 MTR) EOLA. PRESSURE SWITCH. MASTER CONTROL UNIT.
Automatic Fire Detection And Suppression Systems
Minimum Order Quantity: 1 Set
Product Brochure
Type | AFDSS |
Capacity | 2-45 Kg |
Usage/Application | Mining, commercial and on road vehicles |
Fire Extinguisher Type | DCP Powder suppression system |
Service Location | India |
Service Duration | 10-15 DAYS |
Service Mode | Offline |
Service Type | Fire Suppression Systems |
Other Detail:
- Easy installation
- Easy to maintain a proven technology from last 10 years.
Additional Information:
- Item Code: AFDSS09
- Production Capacity: 100/ MONTH
- Delivery Time: 2-3 WEEKS
- Packaging Details: 21LB/9KG DCP CYLINDER WITH AUTOMATIC VALVE, DISCHARGE HOSE, NOZZLES, FIRE DETECTION TUBE, END OF LINE ADOPTER, PRESSURE SWITCH, MANUAL REALEASE SWITCH, MASTER CONTROL UNIT WITH ENGINE SHUT OFF PROVISION,
Automatic Fire Suppression System
Capacity | 4 Kg |
Fire Class | Class C |
Certifications | CE |
Operating Temperature | 100-120 |
Fire Rating | 13 B, 8 B |
Fire Type | A, B, C |
Brand | SAFEX |
Warranty | 2 YEAR |
Discharge Time | 8-10sec |
- Fire suppression systems and evacuation alarms are installed throughout the laboratory and activated by heat and smoke. The sprinkler systems are designed to contain fires and prevent small fires from growing into large one. Portable fire extinguishers are required in any area where chemicals are handled or stored.