Call 08046050877 88% Response Rate

Send Email

Automatic Fire Detection and suppression System

The Scenario:

Public Transport Buses play an important role in providing public transport for dedicated services between suburbs and connecting the last mile of every city and adjoining areas. In recent years, we have seen significant changes in relation to safety in the Bus Transport sector. Fire represents one of the main incident types. Bus Fires are a relatively common and potentially devastating occurrence in the world today, with many fires occurring every day across the globe. Without protection, a bus can be completely destroyed by the uncontrolled growth of a small fire in a very short space of time.

Fire in the engine compartment may occur for several reasons. Engine parts such as the manifold and turbocharger may reach temperatures high enough to cause leaking fuel or oil to ignite. Fires may also occur because of short circuits in electrical wiring and the overheating of engine components or the braking system. The conditions in the engine compartment on buses are challenging for managing the risk of fire.

The Solution:

Looking at the condition, there were few amendments in the Automotive Industry Standard. Under AIS-135 it has been made mandatory to have detection and an alarm system with possible suppression for any such fire. The System is known as Fire detection and suppression system (FDSS), it is an integration of two systems one is Fire detection and another one is Fire suppression / extinguishing system. The other system is, Fire Detection and Alarm System (FDAS) which has an automatic trigger Alarm system in case of fire.

Automatic Fire Detection and suppression System,
Automatic Fire Detection and suppression System,
Automatic Fire Detection and suppression System,
Automatic Fire Detection and suppression System,
Automatic Fire Detection and suppression System,
Automatic Fire Detection and suppression System.

FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM
  • FIRE ALARM WITH GAS FLOODING SYSTEM

FIRE ALARM WITH GAS FLOODING SYSTEM

Product Price: Rs 3.5 Lakh / SetGet Best Price

Product Brochure

Product Details:
TypeFire Alarm System
Fire Suppression TypeFire Extinguisher
Automation GradeAutomatic
CapacityANY
Usage/ApplicationGAS FLOODING SYSTEM
Extinguishing AgentCLEAN AGENT AND CO2
BrandFIRE ENGINEERING TECHNOLOGY
ColorRED
Cylinder HeightAS PER CAPACITY
DesignAS PER NFPA
Gaseous fire suppression is a term to describe the use of gases and chemical agents to extinguish a fire. These Agents are governed with different standards and regulations in the world. The system typically consists of the agent, agent storage containers, agent release valves, fire detectors, fire detection system (wiring control panel, actuation signalling), agent delivery piping, and agent dispersion nozzles.
Gas Flooding System features:
Gas Flooding System Rapid discharge.
A flexible range of cylinder sizes.
Solenoid, mechanical and pneumatic actuation.
Solid brass valve construction for durability.
A versatile range of nozzles for easier system layouts.
Effective on-site installation
 

Designed to withstand every climatic conditions, these devices are widely used in following area of applications:

Transformers Control Rooms
Power Generators
Machinery Spaces
Electrical Rooms & Equipments

Chemical Stores & Chemical Equipment

Switch Rooms
Get Best QuoteRequest A Callback
Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE
  • Afdss System FOR MINING VEHICLE

Afdss System FOR MINING VEHICLE

Product Price: Rs 1.35 Lakh / PieceGet Best Price

Product Brochure

Product Details:
TypeWired
Usage/ApplicationTruck
Range2 CUBIC MTR
BrandFET
Screen Size2.5 inch
MaterialDCP POWDER
Model Name/NumberAFDSS
Warranty12 MONTHS
ColorRED
Battery24V
Vehicle Suppression Systems

February 24, 2022

Vehicle suppression systems keep large vehicles safe in case of fire.

Large construction vehicles and buses are a significant investment for private firms and public transit authorities. Replacing a large construction vehicle consumed by fire is a serious financial setback. Transit authorities need to provide reliable, safe transportation. To protect these assets and the people who use them, install a vehicle suppression system.

 

What is a Vehicle Suppression System?

A vehicle suppression system is a fire extinguishing system installed in a vehicle engine compartment or anywhere else that presents a risk of fire. These systems are designed to discharge a dry or wet chemical extinguishing agent. They can use spot-type heat detectors or linear detection tubing. The type that is installed will depend on the vehicle and its intended use.

Different Types of Vehicle Suppression Systems

Vehicle suppression systems can be dry, wet, or a dual agent system that utilizes both wet and dry chemical agents. Dry systems deprive the fire of oxygen, while wet systems cool the fire. A dual system combines these elements for a more thorough suppression of the fire. A Fireline professional can help determine which system is best for you based on the vehicle type and intended use.

Get Best QuoteRequest A Callback
Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System
  • Automatic Fire Detection And Alarm System

Automatic Fire Detection And Alarm System

Product Price: Rs 1.05 Lakh / SetGet Best Price

Product Brochure

Product Details:
Type of Fire DetectorsHeat detector
MaterialMild Steel (MS)
Operating Voltage230V AC
Operating Current5 AMP
Operating Temperature100
BrandFIRE ENGINEERING TECHNOLOGY
Relay OutputsTrouble Relay, Alarm Relay, Supervisory Relay
CertificationUL/ FM/ LPCB/ CE
DimensionsCUSTOMIZE
Weight1.3 KG
Control KeysMute Buzzer, Evacuate, System Reset
Introduction of Fire Detection and Alarm System

Fire detectors are designed to detect one or more of the three characteristics of fire-smoke, heat and flame. Besides it every fire detection system must include manual call points (break glass), so that in the event of fire can be of immediate help.
During a fire importance of activation of the occupants through alarm or bell is of at most vital and this can performed through alarm system.

Microprocessor based addressable analogue type fire alarm and detection system to be used for various building/areas to detect and provide alarm signal in the main fire alarm panel to be located in the central control room. Fire alarm will be repeated in a repeater alarm panel in the fire station.
Main fire alarm panel annunciation shall be located in the control building. A repeater panel shall be provided in the fire station. Total no of annunciation shall be based on the specific plant requirement.
One (1) siren of 10 Km range is envisaged to provide warning in the event of fire.
In addition to it, PLC panel shall be provided at fire pump house and foam pump house.

Get Best QuoteRequest A Callback
Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System
  • Tube Based Fire Suppression System

Tube Based Fire Suppression System

Product Price: Rs 35,000 / PieceGet Best Price

Product Brochure

Product Details:
Fire Fighting System TypeFire Suppression Systems
Packaging TypeSet
Capacity1-9 Kg
Usage/ApplicationElectrical Fire, Kitchen Fire, Vehicle Fire etc
System typePre-Engineered System
BrandFIREFINDER
MaterialMild Steel
Environment Temp100-120 DEGREE
Fire Suppression TypeCylinder, Fire Extinguisher
CertificationUL/ LPCB/ CE

The principle of all Tube Fire Suppression Systems is a simple self-activating system that offers the widest versatility, which results in an excellent cost / performance balance. Trace Tube Systems can be used in a range of applications, with the principals remaining the same; Stop The Fire Where It Starts.

Electrical Panels & Switch-gear Fire Suppression | Tumble Dryers | Plant & Machinery fire suppression | Fume Cabinet fire suppression | CNC & EDM Machinery | Wind Turbines Agricultural Machinery | Cars/Vans/Trucks – including Motor Sport | Rail & Dockside

FireFinder Quickly & Accurately: These systems use linear detection tubing which is installed throughout the asset it’s covering & can not only quickly and accurately detect a fire but also suppress it before it can damage adjacent components.

Simple Solution To A Complex Fire Problem: These systems do not need complicated electronic detectors or panels and operate simply pneumatically.This alleviates the need for separate power supplies or battery backups and also makes the entire system fail safe with minimal moving parts. We offer a choice of extinguishant agents such as Novec, CO2, Powder, FM200, some of which can be used safe in the knowledge that they will not damage the electrical components or leave a residue.

Get Best QuoteRequest A Callback
FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem
  • FK-5-1-12 SYstem

FK-5-1-12 SYstem

Product Price: Rs 3,500 / KgGet Best Price

Product Brochure

Product Details:
Fire Fighting System TypeFire Suppression Systems
Packaging TypeSet
CapacityAny as per requirement
System typeClean Agent Suppression System
Usage/ApplicationElectrical Panels & server area
BrandAR Suppression
MaterialAs required
Environment Temp21
Fire Suppression TypePipeline, Fire Extinguisher, Cylinder
CertificationUL
FK-5-1-12 Gas supression or FK-5-1-12 fire pritection system is a kind of gas flood system. 

  • FK 1230 (FK-5-1-12) fire suppressant can be safely used where people are present. FK 1230 (FK-5-1-12) systems reach extinguishing levels in 10 seconds or less, stopping ordinary combustible, electrical, and flammable liquid fires before they cause significant damage. That’s the fastest fire protection available, period.
    • The  FK-5-1-12 system is armed and ready to eliminate any fire hazard at a moment’s notice. Its 500 psi operating pressure provides ultimate design flexibility and ensures that the necessary amount of agent reaches every corner of the protected space in under ten seconds, extinguishing a fire in its very earliest stages.
    • FK 5-1-12 is a chemical agent designed and manufactured for Fire Suppression applications. FK 5-1-12 has zero Ozone Depletion Potential making it a replacement for other chemical agents used in Fire suppression like HFC227ea. FK 5-1-12 can be used in manned area and are not harmful to human being.

      The importance of erection, testing and commissioning are overlooked in many projects while installing and fixing Clean Agent Gas Fire Suppression System. It is a very common practice to fabricate the Clean Agent Gas Fire Suppression System including the manifold at site.
      It is very difficult to ensure the proper integration of entire cylinder bank assembly which involves very high pressure and critical instrumentation such as solenoid connection, pneumatic actuation to ensure proper functioning of the entire system.


      bala-wa -5112 Clean Agent Fire Suppression-High Pressure fixed installation clean agent gas cylinder banks are fully pre-assembled,integrated & tested for its proper operation at the factory itself. Customers and consultants may strongly recommend to use pre-assembled & tested bala-wa-5112 cylinder bank assembly.

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Fire Engineering Technology. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.