Fire Suppression System Himachal Pradesh
Fire suppression systems are used to extinguish, control, or in some cases, entirely prevent fires from spreading or occurring. Fire suppression systems have an incredibly large variety of applications, and as such, there are many different types of suppression systems for different applications being used today. Of these, there are some that are still in use but are no longer legal to manufacture and produce.Suppression systems
Fire suppression systems are governed by the codes under the National Fire Protection Association, also known as the NFPA. This organization writes codes, regulations, and recommendations on the proper installation and maintenance of these fire suppression systems. Likewise, the NFPA also lists criteria that must be met for the requirements of certain types of fire suppression systems.
Co2 Fire Fighting System
|Fire Fighting System Type||Co2 Flooding System|
|Certification||UL/ FM/ VDS/ LPCB|
|Installation Services Required||YES|
|Design||NFPA 2001 & NFPA 12|
A gas extinguishing system is a fire extinguishing system that extinguishes fire with the help of a gaseous extinguishing agent either through oxygen displacement (reduction of oxygen content) or physical effects (heat extraction). In contrast to a sprinkler system, a gas extinguishing system is designed to extinguish and not only suppress fire.
Gas extinguishing systems are used when water, foam or powder extinguishing systems are not effective or if extinguishing with the above-mentioned extinguishing agents could cause significant damage. Typical areas of use include all types of electrical switch rooms, IT and server rooms.
Gas extinguishing systems are the "cleanest" extinguishing systems. Extinguishing gases have no influence on conventional electrical systems such as servers, etc. A range of different extinguishing gases can be used for the extinguishing system. The specific properties of the different extinguishing gases also define their area of use. FET has already designed, hydraulically calculated and constructed a large number of gas extinguishing systems. FET has developed in-depth expertise through continuous employee training.
WET CHEMICAL STORED PRESSURE KITCHEN FIRE SUPPRESSION SYSTEM
|Fire Fighting System Type||Fire Suppression Systems|
|System type||Kitchen Fire Suppression System|
|Fire Suppression Type||Cylinder, Pipeline, Fire Extinguisher|
AutoFireX® ILP- Indirect Low-Pressure Clean Agent Systems are primarily Pre-Engineered Automatic Fire detection and suppression System utilising various Low-pressure agents like, ABC Dry Chemical Powder, Foam, Clean agents (HFC227ea, FK 5-1-12, FE36). These Units are designed, manufactured, and tested in ISO 9001:2015 certified facilities
The AutoFireX Linear Pneumatic Fire Detection Tubing (FDT) is installed and connected to ILP Valve via dual seal threaded union attached to the isolation ball valve and routed over/near the protected hazard area/enclosure. Being heat sensitive, the primary function of Linear Pneumatic Fire Detection Tube (under pressure) is to detect heat/fire and activate the valve for discharge of the agent by rupturing at the hottest point along its installed length on flame impingement. On rupture due to loss of pressure in the tube connected to the valve, the pressure from the top head assembly of the ILP valve is released (this can also be achieved by manual activation via operating manual release) thereby initiating internal piston to open position, allowing the pressurised agent to travel through any or combination of three outlet ports via delivery hose/pipes and discharge out from the fixed nozzles, within the protected area, flooding the entire area with the agent and suppressing the fire instantly.